Page 1 of 1
removing rudder
Posted: Thu Mar 26, 2015 10:17 pm
by vett68
can anyone tell me how to remove shock bolts on top and remove rudder i have loosened nut on top of rudder and it wont go through assemblty in rear crossmember
Re: removing rudder
Posted: Mon Apr 06, 2015 11:47 am
by fordgpa
picture please so we can see what the problem is
Peter
Re: removing rudder
Posted: Fri Apr 17, 2015 2:16 am
by Donovan
Vett68
The rudder is held in by the bolt-pin at the top. Remove the nut, knock the bolt out and the top of the steering mechanism should lift off the rudder shaft. Loosen the packing assembly and the rudder should drop out the bottom of the rear tunnel.
If the upper body support frame is twisted, it might cause a slight bind at the top of the rudder. You should be able to pound it out regardless. I just did this several weeks ago following the manual, however it was impossible to remove the rudder without removing or lifting the rear deck to access the top bolt-pin.
Good luck,
Donovan.