Page 1 of 1

Tranfer case seals

Posted: Tue Apr 10, 2007 5:22 pm
by bobassel
Here a small modification for the transfer case.
Instead of the single oil seal of the tranfer case
at the handbrake side a modification for a dubble seal.
You can put 2 SKF oil seals behind each other.
SKF 15649 and SKF 15635 .
Greetings Bob
Image

Re: Tranfer case seals

Posted: Wed May 28, 2008 4:34 pm
by Steve Barber
Bob,

I just bought the transfer case seals that you recommended. Do you have any tips as far as which seal goes in first etc?

Thanks,

-Steve
GPA 5510

Re: Tranfer case seals

Posted: Tue Oct 11, 2016 11:29 pm
by g503
if it helps, we do stock these double lip seals $5.00 each, the part number is A958
Thank you
Ron

Re: Tranfer case seals

Posted: Fri Oct 14, 2016 2:29 pm
by bobassel
Goodday Steve,

Sorry for the delay, but I 've been busy the last days.
The small one,15649 first in the unit, with the number on the seal facing outwards.
Seccond Nbr 2 15635 with the number and close side facing outwards.
Check if the yoke fits well and after installing put grease on the yoke and the seal rubber.
Good luck, Bob