Tranfer case seals

Here we can post about special tools or alternatives for the GPA.

Moderator: bobassel

Post Reply
bobassel
Site Admin
Site Admin
Posts: 419
Joined: Mon Dec 12, 2005 10:29 pm

Tranfer case seals

Post by bobassel » Tue Apr 10, 2007 5:22 pm

Here a small modification for the transfer case.
Instead of the single oil seal of the tranfer case
at the handbrake side a modification for a dubble seal.
You can put 2 SKF oil seals behind each other.
SKF 15649 and SKF 15635 .
Greetings Bob
Image
Ford GPA 12350, april 4th 1943
Author of GPA book,
Willys MD M38A1, A13817 1952

Steve Barber
Posts: 21
Joined: Thu Sep 06, 2007 4:56 pm

Re: Tranfer case seals

Post by Steve Barber » Wed May 28, 2008 4:34 pm

Bob,

I just bought the transfer case seals that you recommended. Do you have any tips as far as which seal goes in first etc?

Thanks,

-Steve
GPA 5510

User avatar
g503
Posts: 4
Joined: Fri Dec 16, 2005 10:47 pm

Re: Tranfer case seals

Post by g503 » Tue Oct 11, 2016 11:29 pm

if it helps, we do stock these double lip seals $5.00 each, the part number is A958
Thank you
Ron
Thanks,
Ron

bobassel
Site Admin
Site Admin
Posts: 419
Joined: Mon Dec 12, 2005 10:29 pm

Re: Tranfer case seals

Post by bobassel » Fri Oct 14, 2016 2:29 pm

Goodday Steve,

Sorry for the delay, but I 've been busy the last days.
The small one,15649 first in the unit, with the number on the seal facing outwards.
Seccond Nbr 2 15635 with the number and close side facing outwards.
Check if the yoke fits well and after installing put grease on the yoke and the seal rubber.
Good luck, Bob
Ford GPA 12350, april 4th 1943
Author of GPA book,
Willys MD M38A1, A13817 1952

Post Reply